Compaq Presario CQ41-200 Compaq Presario CQ41 Notebook PC - Maintenance and S - Page 58
the keyboard cable, to which the keyboard cable is attached, and thendisconnect
View all Compaq Presario CQ41-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Removal and replacement procedures 2. Turn the computer display-side up with the front toward you. 3. Open the computer as far as possible. 4. Lift the rear edge 1 of the keyboard until it rests at an angle. ✎ The keyboard is held by two-sided tape. 5. Slide the keyboard 2 back until the tabs on the bottom of the keyboard are clear of the keyboard cover. 6. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and thendisconnect the keyboard cable 2 from the system board. 7. Remove the keyboard. Reverse this procedure to install the keyboard. 4-22 Maintenance and Service Guide
4–22
Maintenance and Service Guide
Removal and replacement procedures
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge
1
of the keyboard until it rests at an angle.
✎
The keyboard is held by two-sided tape.
5. Slide the keyboard
2
back until the tabs on the bottom of the keyboard are clear of the keyboard cover.
6.
Release the zero insertion force (ZIF) connector
1
to which the keyboard cable is attached, and thendisconnect
the keyboard cable
2
from the system board.
7. Remove the keyboard.
Reverse this procedure to install the keyboard.