Compaq Presario CQ41-200 Compaq Presario CQ41 Notebook PC - Maintenance and S - Page 69
Webcam/microphone module (select models only), Keyboard see
View all Compaq Presario CQ41-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Webcam/microphone module (select models only) Description Webcam/microphone module Removal and replacement procedures Spare part number 487287-001 Before removing the display assembly: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first disconnecting the power cord from the AC outlet and then disconnecting the AC adapter from the computer. 4. Remove the battery (see "Battery" on page 4-7). 5. Disconnect the wireless antenna cables from the WLAN module (see "WLAN module" on page 4-14). 6. Remove the following components: a. Hard drive cover (see "Hard drive" on page 4-8) b. Mini Card compartment cover (see "RTC battery" on page 4-12) c. Optical drive (see "Optical drive" on page 4-20 d. Keyboard (see "Keyboard" on page 4-21) e. Keyboard cover (see "Keyboard cover" on page 4-23) f. Speaker assembly (see "Speaker assembly" on page 4-25) g. Display assembly (see "Display assembly" on page 4-27) Remove the webcam/microphone module: 1. Lift the webcam/microphone module 1 as far from the display enclosure as the webcam/microphone module cable allows. 2. Disconnect the webcam/microphone module cable 2 from the webcam/microphone module. 3. Remove the webcam/microphone module. Reverse this procedure to install the webcam/microphone module. Maintenance and Service Guide 4-33