Compaq Presario CQ41-200 Compaq Presario CQ41 Notebook PC - Maintenance and S - Page 79
Remove the two Phillips PM2.5×3.0 screws, that secures the audio board to the system board.
View all Compaq Presario CQ41-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Removal and replacement procedures Remove the audio board and cable: 1. Disconnect the audio board cable 1 from the system board. 2. Remove the cable from between the components that secure it in the base 2. 3. Remove the two Phillips PM2.5×3.0 screws 3 that secures the audio board to the system board. 4. Lift the rear edge of the audio board 4 so that the audio connectors slide out of the openings in the base enclosure and remove the audio board and cable. Reverse this procedure to install the audio board. Maintenance and Service Guide 4-43
Removal and replacement procedures
Maintenance and Service Guide
4–43
Remove the audio board and cable:
1. Disconnect the audio board cable
1
from the system board.
2. Remove the cable from between the components that secure it in the base
2
.
3. Remove the two Phillips PM2.5×3.0 screws
3
that secures the audio board to the system board.
4. Lift the rear edge of the audio board
4
so that the audio connectors slide out of the openings in the base
enclosure and remove the audio board and cable.
Reverse this procedure to install the audio board.