Compaq Presario CQ41-200 Compaq Presario CQ41 Notebook PC - Maintenance and S - Page 83
Remove the power connector
View all Compaq Presario CQ41-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Removal and replacement procedures Remove the power connector and cable: 1. Turn the computer right-side up. 2. Position the computer with the right side toward you. 3. Disconnect the power connector cable 1 from the bottom of the system board. 4. Remove the power connector 2 from the clip built into the base enclosure. The power connector is secured by two-sided tape. Reverse this procedure to install the power connector and cable. Maintenance and Service Guide 4-47
Removal and replacement procedures
Maintenance and Service Guide
4–47
Remove the power connector and cable:
1. Turn the computer right-side up.
2. Position the computer with the right side toward you.
3. Disconnect the power connector cable
1
from the bottom of the system board.
4. Remove the power connector
2
from the clip built into the base enclosure. The power connector is secured by
two-sided tape.
Reverse this procedure to install the power connector and cable.