D-Link DES-1210-52 Product Manual - Page 58
Select QoS Mode, Queuing Mechanism, Strict Priority, Default Priority, Medium, From Port, To Port
UPC - 790069327827
View all D-Link DES-1210-52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
5 Configuration D-Link Web Smart Switch User Manual Figure 89 - QoS > 802.1p Default Priority By selecting the DSCP priority, the web pages will changes as seen below: Figure 90 - QoS > DSCP Priority Settings Select QoS Mode: D-Link Smart Switch allows the user to prioritize the traffic based on the 802.1p priority in the VLAN tag or the DSCP (Differentiated Services Code Point) priority in the IP header. Only one mechanism is selected to prioritize the packets at a time. Queuing Mechanism: Select Strict Priority to process the packets with the highest priority first. Select WRR (Weighted Round-Robin) to process packets according to the weight of each priority. When a priority level has reached its egress weight, the system will process the packets in the next level even if there are remaining packets. D-Link Smart Switch system's weight of priority levels are: 8 (Highest), 4 (High), 2 (Medium) and 1 (Low) packet. By default, the queuing mechanism is Strict Priority. Default Priority: Default is Medium. In 802.1p QoS mode, you can use From Port / To Port to specify the default priority of each port. In DSCP mode, you can configure the global default priority value by using From DSCP value / To DSCP value. 52