D-Link DES-1210-52 Product Manual - Page 76
Upload, Syntax, Parameters, Description, Config ipif system, Example - 28p
UPC - 790069327827
View all D-Link DES-1210-52 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
6 Command Line Interface D-Link Web Smart Switch User Manual firmware_fromTFTP cfg_fromTFTP tftp://ip-address/ filename Download and install new firmware on the Switch from a TFTP server. Download a switch configuration file from a TFTP server. The IP address of the TFTP server. The filename of the firmware or switch configuration file on the TFTP server. You need to specify the DOS path if the file is not at the root directory of the TFTP server. Note: Switch will reboot after restore and all current configurations will be lost Upload The upload command is used to upload the firmware file or a Switch configuration file to a TFTP server. Syntax upload { firmware_toTFTP tftp://ip-address/filename | cfg_toTFTP tftp://ip-address/filename } Parameters Parameter firmware_toTFTP cfg_toTFTP tftp://ip-address/ filename Description Upload the firmware on the Switch from a TFTP server. Specifies that the Switch's current settings will be uploaded to the TFTP server. The IP address of the TFTP server. The filename of the firmware or switch configuration file on the TFTP server. You need to specify the DOS path if the file is not at the root directory of the TFTP server. Config ipif system The config ipif system command sets the IP address of the switch. Syntax config ipif system { ipaddress gateway | dhcp } Parameter Parameter Description ipaddress example,10.1.2.3/255.0.0.0). gateway address>