D-Link DES-3010GA Product Manual - Page 106

Aggregating Ports Configuring LACP Configuring LACP Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the same speed, set to full-duplex operations. LAG ports can contain different media types if the ports are operating at the same speed. Aggregated links can be set up manually or automatically established by enabling Link Aggregation Control Protocol (LACP) on the relevant links. Aggregate ports can be linked into link-aggregation port-groups. Each group is comprised of ports with the same speed. The LACP Parameters Page contains fields for configuring LACP LAGs. To configure LACP for LAGs: 1. Click Advanced Setup > Interface > LACP Parameters tab. The LACP Parameters Page opens. Figure 57: LACP Parameters Page The LACP Parameters Page contains the following fields: • Port - Displays the port number to which timeout and priority values are assigned. • Port-Priority - Displays the LACP priority value for the port. The field range is 1-65535. • LACP Timeout - Displays the administrative LACP timeout. 2. Click . The LACP Parameters Settings Page opens: Page 105