D-Link DES-3010GA Product Manual - Page 21

D-Link DES-3010FA/GA User Guide The console LED indications are described in the following table: Table 8: Console LED Indications Port Description LED Indication Console Flashing Green Green Description Power On Self Test (POST) is in progress. POST failure. A problem has been discovered during the POST. Cable, Port, and Pinout Information This section describes the devices physical interfaces and provides information about cable connections. Stations are connected to the device ports through the physical interface ports on the front panel. For each station, the appropriate mode (Half/Full Duplex, Auto Negotiation) is set. The default is Auto Negotiation. Pin Connections for the 10/100/1000 Ethernet Interface The switching port can connect to stations wired in standard RJ-45 Ethernet station mode using straight cables. Transmission devices connected to each other use crossed cables. The following figure illustrates the pin allocation. Figure 9: RJ-45 Pin Allocation The following table describes the pin allocation Table 9: RJ-45 Pin Connections for 10/100/1000 Base-TX Pin Use 1 TxRx 1+ 2 TxRx 1- 3 TxRx 2+ 4 TxRx 2- 5 TxRx 3+ 6 TxRx 3- 7 TxRx 4+ 8 TxRx 4- Page 20