D-Link DES-3010GA Product Manual - Page 157
D-Link DES-3010FA/GA User Guide, Multicast Global Parameters Settings Auto Learn
UPC - 790069280689
View all D-Link DES-3010GA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
D-Link DES-3010FA/GA User Guide • Auto Learn - Indicates if Auto Learn is enabled on the device. If Auto Learn is enabled, the devices automatically learns where other Multicast groups are located. Enables or disables Auto Learn on the Ethernet device.The possible field values are: - Enable - Enables auto learn - Disable - Disables auto learn. • Host Timeout - Indicates the amount of time host waits to receive a message before timing out. The default time is 260 seconds. • Multicast Router Timeout - Indicates the amount of the time the Multicast router waits to receive a message before it times out. The default value is 300 seconds. • Leave Timeout - Indicates the amount of time the host waits, after requesting to leave the IGMP group and not receiving a Join message from another station, before timing out. If a Leave Timeout occurs, the switch notifies the Multicast device to stop sending traffic The Leave Timeout value is either user-defined, or an immediate leave value. The default timeout is 10 seconds. 2. Check the Enable IGMP Snooping Status checkbox. 3. Click . The Multicast Global Parameters Settings Page opens: Figure 96: Multicast Global Parameters Settings Page 4. Modify the VLAN ID, IGMP Status Enable, Auto Learn, Host Timeout, MRouter Timeout, and Leave Timeout fields. 5. Click . The IGMP global parameters are sent, and the device is updated. Page 156