D-Link DES-3010GA Product Manual - Page 141
Defining Classic Spanning Tree, D-Link DES-3010FA/GA User Guide, STP Properties
UPC - 790069280689
View all D-Link DES-3010GA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
D-Link DES-3010FA/GA User Guide Defining Classic Spanning Tree The STP Properties Page contains parameters for enabling STP on the device. To enable STP on the device: 1. Click Advanced Setup > Spanning Tree > STP > Properties. The STP Properties Page opens: Figure 85: STP Properties Page The STP Properties Page contains the following fields: • Spanning Tree State - Indicates whether STP is enabled on the device. The possible field values are: - Enable - Enables STP on the device. - Disable - Disables STP on the device. • STP Operation Mode - Specifies the STP mode that is enabled on the device. The possible field values are: - Classic STP - Enables Classic STP on the device. This is the default value. - Rapid STP - Enables Rapid STP on the device. - Multiple STP - Enables Multiple STP on the device. • BPDU Handling - Determines how BPDU packets are managed when STP is disabled on the port or device. BPDUs are used to transmit spanning tree information. The possible field values are: - Filtering - Filters BPDU packets when spanning tree is disabled on an interface. This is the default value. - Flooding - Floods BPDU packets when spanning tree is disabled on an interface. • Path Cost Default Values - Specifies the method used to assign default path cost to STP ports. The possible field values are: Page 140