Home » D-Link Manuals » Hubs & Switches » D-Link DES-3010GA » Manual Viewer

D-Link DES-3010GA Product Manual - Page 45

Software Download and Reboot, Software Download from the Startup Menu, Erasing the Flash File

UPC - 790069280689

Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

D-Link DES-3010FA/GA User Guide Note When selecting an option from the Startup menu, time must be taken into account. If no selection is made within 35 seconds (default), the device times out. This default value can be changed through the CLI. Only technical support personnel can use Diagnostics Mode. For this reason, Diagnostics Mode is not described in this guide. Software Download and Reboot This section describes the procedures for downloading software and rebooting the system, and includes the following topics: • Software Download from the Startup Menu • Erasing the Flash File • Password Recovery • Software Download through TFTP Server • Software Download through XModem Software Download from the Startup Menu The software download procedure is performed when a new version must be downloaded to replace corrupted files, or when the system software must be upgraded. To download software from the Startup menu: 1. From the Startup menu, press [1]. The following prompt appears: Downloading code using XMODEM 2. When using HyperTerminal, click Transfer on the HyperTerminal Menu Bar. 3. In the Filename field, enter the file path for the file to be downloaded. 4. Ensure that the Xmodem protocol is selected in the Protocol field. 5. Press Send. The software is downloaded. Note After software download, the device reboots automatically. Erasing the Flash File In some cases, the device configuration must be erased. If the configuration is erased, all parameters configured via CLI, EWS, or SNMP must be reconfigured. To erase the device configuration: 1. From the Startup menu, press [2] within two seconds to erase the flash file. The following message is displayed: Warning! About to erase a Flash file. Are you sure (Y/N)? y 2. Press Y. The following message is displayed. Write Flash file name (Up to 8 characters, Enter for none.):config File config (if present) will be erased after system initialization ======== Press Enter To Continue ======== 3. Enter config as the name of the flash file. The configuration is erased and the device reboots. Page 44

Section	Page
Preface	7
D-Link DES 3010FA/GA Installation Guide	10
Section 1. Device Description	11
Viewing the Device	12
DES-3010FA Front Panel	12
DES-3010GA Front Panel	12
Ports Description	14
10/100Base-TX Fast Ethernet Ports	14
1000Base-T Gigabit Ethernet Ports	14
100Base-FX Fiber Ports	14
SFP Port	14
DB-9 Console Port	15
Cable Specifications	16
LED Defiitions	17
Port LEDs	17
Power LED	20
Console LED	20
Cable, Port, and Pinout Information	21
Pin Connections for the 10/100/1000 Ethernet Interface	21
Physical Dimensions	22
Section 2. Mounting Device	23
Preparing for Installation	24
Installation Precautions	24
Site Requirements	24
Unpacking	25
Installing the Device	26
Desktop or Shelf Installation	26
Rack Installation	26
Wall Installation	29
Connecting the Device	30
Connecting the Switch to a Terminal	30
AC Power Connection	31
Section 3. Starting and Configuring the Device	32
Configuring the Terminal	33
Installation Procedure	33
Device Port Default Settings	33
Booting the Device	34
Configuration Overview	35
Initial Configuration	35
Advanced Configuration	40
Receiving an IP Address from a DHCP Server	40
Receiving an IP Address from a BOOTP Server	40
Security Management and Password Configuration	41
Startup Procedures	44
Startup Menu Procedures	44
Software Download and Reboot	45
D-Link DES 3010FA/GA EWS User Guide	49
Section 4. Getting Started	50
Starting the D-Link Embedded Web Interface	51
Understanding the D-Link Embedded Web Interface	52
Device Representation	54
Using the D-Link Embedded Web Interface Management Buttons	54
Using Screen and Table Options	55
Adding Configuration Information	55
Modifying Configuration Information	55
Deleting Configuration Information	56
Resetting the Device	57
Logging off from the Device	59
Section 5. Managing Device Information	60
Section 6. Configuring Device Security	62
Configuring Management Security	63
Configuring Authentication Methods	63
Configuring Passwords	80
Configuring Network Security	84
Network Security Overview	84
Defining Network Authentication Properties	85
Defining Port Authentication	87
Configuring Traffic Control	93
Section 7. Configuring Ports	98
Viewing Port Properties	101
Section 8. Aggregating Ports	103
Aggregating Ports	104
Configuring LACP	106
Section 9. Configuring VLANs	108
Defining VLAN Properties	109
Defining VLAN Membership	111
Defining VLAN Interface Settings	112
Defining Private VLANs	114
Configuring GARP	117
Defining GARP	117
Defining GVRP	119
Section 10. Configuring IP Information	121
Configuring IP Interfaces	121
Defining IP Addresses	122
Defining Default Gateways	125
Configuring DHCP	126
Configuring ARP	128
Configuring Domain Name Servers	130
Defining DNS Servers	131
Defining DNS Host Mapping	133
Section 11. Defining the Forwarding Database	135
Defining Static Forwarding Database Entries	136
Defining Dynamic Forwarding Database Entries	138
Section 12. Configuring Spanning Tree	140
Defining Classic Spanning Tree	141
Defining STP on Interfaces	143
Defining Rapid Spanning Tree	146
Defining Multiple Spanning Tree	149
Defining MSTP Instance Settings	149
Defining MSTP Interface Settings	152
Section 13. Configuring Multicast Forwarding	155
Defining IGMP Snooping	156
Defining Multicast Bridging Groups	158
Defining Multicast Forward All Settings	160
Section 14. Configuring SNMP	162
SNMP v1 and v2c	162
SNMP v3	162
Configuring SNMP Security	163
Defining SNMP Security	163
Defining SNMP Views	165
Defining SNMP Group Profiles	167
Defining SNMP Group Members	170
Defining SNMP Communities	173
Configuring SNMP Notifications	176
Defining SNMP Notification Global Parameters	177
Defining SNMP Notification Filters	178
Defining SNMP Notification Recipients	180
Section 15. Configuring Quality of Service	184
VPT Classification Information	184
CoS Services	185
Configuring Quality of Service General Settings	186
Defining QoS Settings	186
Defining Bandwidth Settings	188
Modifying QoS Interface Settings	189
Defining Queue Settings	191
Mapping QoS Queues	192
Mapping CoS Values to Queues	192
Mapping DSCP Values to Queues	193
Section 16. Managing System Files	194
File Management Overview	195
Downloading System Files	196
Firmware Download	196
Configuration Download	197
Uploading System Files	198
Upload Type	198
Software Image Upload	199
Configuration Upload	199
Copying Files	200
Restoring the Default Configuration File	200
Section 17. Managing System Logs	201
Enabling System Logs	202
Viewing the Device Memory Logs	204
Clearing Device Memory Logs	204
Viewing the FLASH Logs	205
Clearing FLASH Logs	205
Defining Servers Log Parameters	206
Section 18. Managing Device Diagnostics	207
Configuring Port Mirroring	208
Viewing Integrated Cable Tests	210
Viewing Optical Transceivers	211
Viewing the CPU Utilization	212
Section 19. Configuring System Time	213
Configuring Daylight Savings Time	214
Configuring SNTP	218
Polling for Unicast Time Information	218
Polling for Anycast Time Information	218
Broadcast Time Information	218
Defining SNTP Global Settings	220
Defining SNTP Authentication	222
Defining SNTP Servers	224
Defining SNTP Interface Settings	226
Section 20. Viewing Statistics	228
Viewing Interface Statistics	228
Viewing Device Interface Statistics	229
Resetting Interface Statistics Counters	230
Viewing Etherlike Statistics	230
Resetting Etherlike Statistics Counters	231
Viewing GVRP Statistics	232
Resetting GVRP Statistics Counters	233
Viewing EAP Statistics	233
Managing RMON Statistics	234
Viewing RMON Statistics	235
Resetting RMON Statistics Counters	236
Configuring RMON History	237
Defining RMON Alarms	244
Troubleshooting	246
Problem Management	247
Troubleshooting Solutions	247
Contacting D-Link Technical Support	250
Warranty	277
Product Registration	280

Match case Limit results 1 per page

D-Link DES-3010FA/GA User Guide

Page 44

Note

When selecting an option from the Startup menu, time must be taken into account. If no selection is made

within 35 seconds (default), the device times out. This default value can be changed through the CLI.

Only technical support personnel can use Diagnostics Mode. For this reason, Diagnostics Mode is not described

in this guide.

Software Download and Reboot

This section describes the procedures for downloading software and rebooting the system, and includes the

following topics:

•

Software Download from the Startup Menu

•

Erasing the Flash File

•

Password Recovery

•

Software Download through TFTP Server

•

Software Download through XModem

Software Download from the Startup Menu

The software download procedure is performed when a new version must be downloaded to replace corrupted

files, or when the system software must be upgraded. To download software from the Startup menu:

From the Startup menu, press

[1]

. The following prompt appears:

Downloading code using XMODEM

When using HyperTerminal, click

Transfer

on the HyperTerminal Menu Bar.

In the

Filename

field, enter the file path for the file to be downloaded.

Ensure that the Xmodem protocol is selected in the

Protocol

field.

Press

Send

. The software is downloaded.

Note

After software download, the device reboots automatically.

Erasing the Flash File

In some cases, the device configuration must be erased. If the configuration is erased, all parameters configured

via CLI, EWS, or SNMP must be reconfigured.

To erase the device configuration:

From the Startup menu, press

[2]

within two seconds to erase the flash file. The following message is

displayed:

Warning! About to erase a Flash file.

Are you sure (Y/N)? y

Press

. The following message is displayed.

Write Flash file name (Up to 8 characters, Enter for none.):config

File config (if present) will be erased after system initialization

======== Press Enter To Continue ========

Enter

config

as the name of the flash file. The configuration is erased and the device reboots.