D-Link DES-3010GA Product Manual - Page 113

D-Link DES-3010FA/GA User Guide - PV - Promiscuous - Indicates the port is part of a PV Promiscuous VLAN. - PV - Isolated - Indicates the port is part of a PV Isolated VLAN. - PV - Community - Indicates the port is part of a PV Community VLAN. • Dynamic - Assigns a port to a VLAN based on the host source MAC address connected to the port. • PVID - Assigns a VLAN ID to untagged packets. The possible values are 1-4094. VLAN 4095 is defined as per standard and industry practice as the Discard VLAN. Packets classified to the Discard VLAN are dropped. • Frame Type - Specifies the packet type accepted on the port. The possible field values are: - Admit Tag Only - Only tagged packets are accepted on the port. - Admit All - Both tagged and untagged packets are accepted on the port. • Ingress Filtering- Indicates whether ingress filtering is enabled on the port. The possible field values are: - Enable - Enables ingress filtering on the device. Ingress filtering discards packets that are defined to VLANs of which the specific port is not a member. - Disable - Disables ingress filtering on the device. • Reserve VLAN - Indicates the VLAN selected by the user to be the reserved VLAN if not in use by the system. 2. Select a port. 3. Click . The VLAN Interface Settings Page opens: Figure 63: VLAN Interface Settings Page 4. Define the Interface, Port VLAN Mode, Dynamic, PVID, Frame Type, Ingress Filtering, and Reserve VLAN for Internal Use fields. 5. Click . The VLAN interface settings are modified, and the device is updated. Page 112