D-Link DSN-3400-10 User's Manual for DSN-3200-10 Valid for firmware 1.6.1 - Page 94
Setting the System Battery Policy
UPC - 790069299766
View all D-Link DSN-3400-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
5.4.15 Setting the System Battery Policy If your xStack Storage Array has an onboard battery, the system battery policy defines how contents in cache memory are handled if the battery is not fully charged. By default, the xStack Storage Array is configured to buffer all I/O in cache memory. You can, however, change this setting to protect data against situations when the battery is not fully charged. 1. Click the xStack Storage icon on the Physical Resources tab. 2. Perform one of the following steps: - On the File menu, click Set System Battery Policy. - Right-click and click Set System Battery Policy. Either step displays the Battery Policy dialog box appears, with the current setting shown (see Figure 5-44). The icon at the top of the dialog box provides a color-coded indication of the xStack Storage Array battery status. Figure 5-44. Battery Policy Dialog Box 3. Select the appropriate setting that the xStack Storage Array should whenever the battery is not fully charged (see Table 5-18). 4. Click OK. Table 5-18 Battery Policy Settings Setting Ignore the status of the battery and do nothing Stop buffering I/O in cache, and directly write data to disk Prevent any reads from or writes to volumes Description No action is taken to protect the contents of cache data in the event of an uncharged battery. If the xStack Storage Array loses AC power, its onboard battery will be used to protect the contents of cache memory (up to 72 hours for a fully charged battery). I/O buffered in cache memory is written to disk whenever the xStack Storage Array battery is not fully charged. Stops all read and write operations whenever the battery is not fully charged. 94 Chapter 5 Configuring the xStack Storage Array