Dell 1135N Service Manual - Page 105
Black/White Spot
View all Dell 1135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Alignment and Troubleshooting 4) Black/White Spot Description : 1. Dark or blurry spots occur periodically in the printing 2. White spots occur periodically in the printing 1. If dark or blurry black spots occur periodically, the rollers in the Developer may be contaminated with foreign material or paper particles. (Charge roller : 26.7mm interval OPC drum : 75.5mm interval) Print several OPC cleaning Mode Prints and then run the Self-test 2 or 3 times. 2. If faded areas or voids occur in a black image at intervals of 75.5 mm, or black spots occur elsewhere, the OPC drum surface is damaged. 3. If a black image is partially broken, the transfer voltage is abnormal or the transfer roller's life has expired. In case of 75.5 mm interval unremovable in 1, Clean foreign substances stuck on the OPC location equivalent to black spots and white spots with a dry cotton cloth. 1. The transfer roller has expired [50.000 sheets]. Replace it. 2. In case of 47 mm interval unremovable in 1, take measures as to replace the developer cartridge and try to print out. 3. Clean the inside of the set against the paper particles and foreign matter in order not to cause the trouble. Service Manual 4-32