Dell 1135N Service Manual - Page 106
Light Image
View all Dell 1135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Alignment and Troubleshooting 5) Light Image Description : The printed image is light, with no ghost. 1. Develop roller brush is too thin due to the cartridge being almost empty. 2. Ambient temperature is below than 10. 3. Bad contact caused by the toner stains between the high voltage terminal in the HVPS. 4. Abnormal output from the HVPS. (Run self-test and check 1~4) Check if the Toner Save mode is off. Check if the density is light. No 1 : Replace the toner cartridge and try to print out. No 2 : Instruct the customer that the machine has to be at average room temperate in order to produce good copy quality. No3 : Clean any contaminated terminals. Replace the HVPS if the problems any contaminated terminals. not solved by the above four instructions. Service Manual 4-33