Dell 1135N Service Manual - Page 35
■ HVPS Board
View all Dell 1135N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Product specification and feature ■ HVPS Board • Transfer High Voltage (THV+) - Input Voltage: 24 V DC ± 15% - Output Voltage: +1.3KV(Duty Variable) - Line Regulation : under±3% (fluctuation input 21.6V ~ 27.6V) - Output Voltage Rising Time 50ms Max - Output Voltage Falling Time : 100 ms Max - Fluctuating transfer voltage with environmental various : 0 V~ 5 KV - Environment Recognition Control Method : The THV-PWM ACTIVE is transfer active signal. It detects the resistance by recognizing the voltage value, F/B, while permits the environmental recognition voltage. - Output Voltage Control Method : Transfer Output Voltage is outputted and controlled by changing Duty of THVPWM Signal. • Charge Voltage (MHV) - Input Voltage : 24 V DC ± 15% - Output Voltage : -1.3KV DC ± 3% - Output Voltage Rising Time : 50 ms Max - Output Voltage Falling Time : 50 ms Max - Output Control Signal(MHV-PWM) : CPU is HV output when PWM is Low • Cleaning Voltage (THV-) - -1.2KV ± 15% - The (+) Transfer Voltage is not outputted because the THV PWM is controlled with high. - The (-) Transfer Voltage is outputted because the THV-Enable Signal is controlled with low - The output fluctuation range is big because there is no Feedback control & connection Resistor. • Developing Voltage (DEV) - Input Voltage : 24 V DC ± 15% - Output Voltage: -480V DC ± 3% - Output Voltage Fluctuation Method : PWM Control - Line Regulation : under±3% (fluctuation input 21.6V ~ 27.6V) - Load Regulation : Under ±3% - Output Voltage Rising Time : 50 ms Max - Output Voltage Falling Time : 50 ms Max - Output Control Signal (BIAS-PWM) : the CPU output is HV output when PWM is low. • Supply - Output Voltage : -630V DC ± 5% (ZENER using, DEV ) - Line Regulation : under±3% (fluctuation input 21.6V ~ 27.6V) - Load Regulation : Under ±3% - Output Voltage Rising Time : 50 ms Max - Output Voltage Falling Time : 50 ms Max - Output Control Signal (BIAS-PWM) : the CPU is HV output when PWM is low 2-23 Service Manual