Dell Alienware m17 R3 Service Manual - Page 17
Installing the M.2 2230 solid-state drive from the M.2 slot one
View all Dell Alienware m17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Remove the screw (M2x3) that secures the solid-state drive thermal shield to the M.2 2230 mounting bracket. NOTE: A thermal shield is only present if the capacity of the solid-state drive is 512 GB or higher. 2. Remove the solid-state drive thermal shield from the M.2 2230 solid-state drive. 3. Lift and remove the M.2 2230 solid-state drive from the M.2 card slot on the system board. 4. Remove the screw (M2x3) that secures the M.2 2230 mounting bracket to the palm-rest assembly. 5. Lift and remove the M.2 2230 mounting bracket from the palm-rest assembly. Installing the M.2 2230 solid-state drive from the M.2 slot one Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task NOTE: This procedure applies if you are installing a 2230 solid-state drive in M.2 slot one. 17