Dell Alienware m17 R3 Service Manual - Page 18
thermal shield.
View all Dell Alienware m17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
NOTE: Depending on the configuration ordered, your computer may support either 2230 solid-state drive or 2280 solidstate drive in M.2 slot one. NOTE: A thermal shield is required for optimal heat dissipation if the capacity of the solid-state drive is 512 GB or higher. If a higher configuration solid-state drive is installed after you purchase the computer, contact Dell support to purchase a thermal shield. The following image indicates the location of the 2230 solid-state drive that is installed in M.2 slot one and provides a visual representation of the installation procedure. Steps 1. Place and align the M.2 2230 mounting bracket on the palm-rest assembly. 2. Replace the screw (M2x3) that secures the M.2 2230 mounting bracket to the palm-rest assembly. 3. Align the notch on the M.2 2230 solid-state drive with the tab on the M.2 card slot on the system board. 4. Slide the M.2 2230 solid-state drive into the M.2 card slot on the system board. 5. Slide the solid-state drive thermal shield on the M.2 2230 solid-state drive. NOTE: The next step is only applicable if the capacity of the solid-state drive is 512 GB or higher. 6. Replace the screw (M2x3) that secures the M.2 2230 solid-state drive and the solid-state drive thermal shield to the M.2 2230 mounting bracket. 18