Dell Alienware m17 R3 Service Manual - Page 47
Installing the system board, Prerequisites, About this task
View all Dell Alienware m17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
17. Remove the two (M2.5x5) screws that secure the fans to the palm-rest assembly. 18. Remove the five (M2x3) screws that secure the system board to the palm-rest assembly. 19. Remove the three (M2x3) screws that secure the left I/O-board to the palm-rest assembly. 20.Lift the system board and the left I/O-board out of the palm-rest assembly. 21. Turn the system board over. 22.Remove the left I/O-board. 23.Remove the fan and heat-sink assembly. Installing the system board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the system board and provides a visual representation of the removal procedure. 47
17.
Remove the two (M2.5x5) screws that secure the fans to the palm-rest assembly.
18.
Remove the five (M2x3) screws that secure the system board to the palm-rest assembly.
19.
Remove the three (M2x3) screws that secure the left I/O-board to the palm-rest assembly.
20.
Lift the system board and the left I/O-board out of the palm-rest assembly.
21.
Turn the system board over.
22.
Remove the
left I/O-board
.
23.
Remove the
fan and heat-sink assembly
.
Installing the system board
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the system board and provides a visual representation of the removal procedure.
47