Dell Alienware m17 R3 Service Manual - Page 31
Touchpad, Removing the touchpad
View all Dell Alienware m17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Steps 1. Using the alignment pins, place the keyboard-controller board into place on the palm-rest assembly. 2. Align the screw holes on the keyboard-controller board with the screw holes on the palm-rest assembly. 3. Connect the keyboard-controller board cable to the keyboard-controller board and close the latch. 4. Connect the keyboard cable to the keyboard-controller board and close the latch. 5. Connect the keyboard-backlight cable to the keyboard-controller board and close the latch. 6. Replace the two screws (M2x1.9) that secure the keyboard-controller board to the palm-rest assembly. Next steps 1. Install the battery. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Touchpad Removing the touchpad Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. About this task The following image indicates the location of the touchpad and provides a visual representation of the removal procedure. 31