Dell Alienware m17 R3 Service Manual - Page 42
Right I/O-board, Removing the right I/O-board
View all Dell Alienware m17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Main (white triangle) Antenna-cable color White Auxiliary (black triangle) Black 12. Place the wireless card bracket on the wireless card. 13. Replace the screw (M2x3) that secures the wireless card bracket to the left I/O-board. Next steps 1. Install the rear I/O-cover. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Right I/O-board Removing the right I/O-board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the battery. 4. Remove the 2230 solid-date drive in M.2 slot two, if installed. 5. Remove the 2280 solid-date drive in M.2 slot two, if installed. About this task The following image indicates the location of the right I/O-board and provides a visual representation of the removal procedure. 42