Dell Alienware m17 R3 Service Manual - Page 56
Power-button assembly, Removing the power-button assembly
View all Dell Alienware m17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Steps 1. Place the power-adapter port into the slot on the palm-rest assembly. 2. Place the power-adapter port bracket on the power-adapter port. 3. Replace the two screws (M2x3) that secure the power-adapter port bracket to the palm-rest assembly. Next steps 1. Follow step 3 to step 22 in installing the system board. 2. Install the battery. 3. Install the rear I/O-cover. 4. Install the 2280 solid-state drive in M.2 slot two, if installed. 5. Install the 2230 solid-state drive in M.2 slot two, if installed. 6. Install the 2280 solid-state drive in M.2 slot one, if installed. 7. Install the 2230 solid-state drive in M.2 slot one, if installed. 8. Install the base cover. 9. Follow the procedure in After working inside your computer. Power-button assembly Removing the power-button assembly Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 2230 solid-state drive in M.2 slot one, if installed. 4. Remove the 2280 solid-state drive in M.2 slot one, if installed. 5. Remove the 2230 solid-state drive in M.2 slot two, if installed. 6. Remove the 2280 solid-state drive in M.2 slot two, if installed. 7. Remove the rear I/O-cover. 8. Remove the battery. 9. Remove the right I/O-board. 10. Follow step 1 to step 21 in removing the system board. 56