Dell Alienware m17 R3 Service Manual - Page 35
Installing the rear I/O-cover, system board before removing the rear I/O-cover.
View all Dell Alienware m17 R3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Steps 1. Peel and remove the Mylar that covers the system board. 2. Disconnect and peel the Tron-light cable from the system board. CAUTION: To prevent damaging your computer, ensure that the Tron-light cable has been disconnected from the system board before removing the rear I/O-cover. 3. Remove the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest assembly. 4. Remove the two screws (M2x4.5) that secure the rear I/O-cover to the palm-rest assembly. 5. Firmly grasp the sides of your computer with both hands and push the rubber feet on the rear I/O-cover outwards with your thumbs to release the rear I/O-cover from the palm-rest assembly. 6. Lift the rear I/O-cover from the palm-rest assembly. Installing the rear I/O-cover Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the rear I/O-cover and provides a visual representation of the installation procedure. 35