Dell Alienware x16 R2 Owners Manual - Page 48
Table 25. Antenna-cable color scheme, Steps, Connectors on the wireless, Antenna-cable color
View all Dell Alienware x16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Steps 1. Connect the antenna cables to the wireless card. The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer. Table 25. Antenna-cable color scheme Connectors on the wireless card Main Antenna-cable color White Silkscreen marking MAIN △ (white triangle) Auxiliary Black AUX ▲ (black triangle) 2. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-card slot. 3. Align the screw hole on the wireless-card bracket with the screw hole on the wireless card and palm-rest and keyboard assembly. 4. Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the palm-rest and keyboard assembly. 5. Align the screw hole on the wireless card thermal shield with the screw hole on the palm-rest and keyboard assembly. 6. Replace the two screws (M2x4) that secures the wireless card thermal shield to the wireless card and palm-rest and keyboard assembly. NOTE: The thermal shield is applicable for computers that are shipped with certain configurations only. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. 48