Dell Alienware x16 R2 Owners Manual - Page 99
I/O board, Removing the I/O board
View all Dell Alienware x16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Next steps 1. Follow the procedure from step 5 to step 20 in Replacing the system board. NOTE: The system board can be removed and installed along with the heat sink. This simplifies the removal and installation procedure and avoids breaking the thermal bond between the system board and heat sink. 2. Install the rear I/O-cover. 3. Install the graphics-card fan. 4. Install the processor fan. 5. Install the solid state drive bracket. 6. Install the M.2 2230 solid state drive or M.2 2280 solid state drive, as applicable. 7. Install the wireless card. 8. Install the battery. 9. Install the base cover. 10. Follow the procedure in After working inside your computer. I/O board Removing the I/O board CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Remove the base cover. 2. Remove the battery. 3. Remove the wireless card. 4. Remove the M.2 2230 solid state drive or M.2 2280 solid state drive, as applicable. 5. Remove the solid state drive bracket. 6. Remove the processor fan. 7. Remove the graphics-card fan. 8. Remove the rear I/O-cover. 9. Remove the display assembly. 10. Follow the procedure from step 1 to step 16 in Removing the system board. NOTE: The system board can be removed and installed along with the heat sink. This simplifies the removal and installation procedure and avoids breaking the thermal bond between the system board and heat sink. About this task The following images indicate the location of the I/O board and provide a visual representation of the removal procedure. 99