Dell Alienware x16 R2 Owners Manual - Page 62

microSD-card reader, Removing the microSD-card reader

Get Dell Alienware x16 R2 PDF manuals and user guides View all Dell Alienware x16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Steps 1. Align and place the headset port into the slot on the palm-rest and keyboard assembly. 2. Replace the screw (M1.6x3) that secures the headset port to the palm-rest and keyboard assembly. 3. Adhere the tape that secures the headset-port cable to the fan and heat-sink assembly. 4. Connect the headset-port cable to the system board. 5. Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable. 6. Adhere the tape that secures the I/O-board cable to the system board. 7. Connect the microSD-card reader cable from the system board. Next steps 1. Install the rear I/O-cover. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. microSD-card reader Removing the microSD-card reader CAUTION: The information in this removal section is intended for authorized service technicians only. Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the rear I/O-cover. About this task The following images indicate the location of the microSD-card reader and provide a visual representation of the removal procedure. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
Steps
1.
Align and place the headset port into the slot on the palm-rest and keyboard assembly.
2.
Replace the screw (M1.6x3) that secures the headset port to the palm-rest and keyboard assembly.
3.
Adhere the tape that secures the headset-port cable to the fan and heat-sink assembly.
4.
Connect the headset-port cable to the system board.
5.
Slide the I/O-board cable into the connector on the system board and close the latch to secure the cable.
6.
Adhere the tape that secures the I/O-board cable to the system board.
7.
Connect the microSD-card reader cable from the system board.
Next steps
1.
Install the
rear I/O-cover
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
microSD-card reader
Removing the microSD-card reader
CAUTION: The information in this removal section is intended for authorized service technicians only.
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
3.
Remove the
rear I/O-cover
.
About this task
The following images indicate the location of the microSD-card reader and provide a visual representation of the removal procedure.
62