Dell Alienware x16 R2 Owners Manual - Page 49
Rear I/O-cover, Removing the rear I/O-cover
View all Dell Alienware x16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Rear I/O-cover Removing the rear I/O-cover Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following images indicate the location of the rear I/O-cover and provide a visual representation of the removal procedure. NOTE: To prevent damaging your computer, ensure that the Tron-light cable has been disconnected from the system board before removing the rear I/O-cover. To see the location of the Tron-light cable, see system board components in Removing the system board. Steps 1. Remove the two screws (M2.5x5) that secure the rear I/O-cover to the palm-rest and keyboard assembly. 2. Remove the four screws (M1.6x3) that secure the left and right Tron-light cables to the palm-rest and keyboard assembly. CAUTION: Do not pull at the bend points of the Tron-light cables and check for damage while removing and installing the rear I/O cover. 3. Firmly grasp the sides of your computer with both hands and push it outwards to remove the rear I/O-cover off the palm-rest and keyboard assembly. 49