Dell Alienware x16 R2 Owners Manual - Page 89
After performing all the above steps, you are left with the system board.
View all Dell Alienware x16 R2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
17. Turn the system-board assembly over. 18. Remove the fan and heat-sink assembly. 19. Remove the screw (M2x3) that secures the USB Type-C bracket to the system board. 20.Lift the USB Type-C bracket off the system board. NOTE: The USB Type-C bracket on the bottom of the system board must be transferred to the replacement system board. 21. Turn the system-board assembly over. 22.After performing all the above steps, you are left with the system board. NOTE: Before returning the faulty system board. Adhere the processor (CPU) sticker over the processor (CPU) chip and GPU sticker over the GPU and ensure that it covers the entire surface of it. 89
17.
Turn the system-board assembly over.
18.
Remove the
fan and heat-sink assembly
.
19.
Remove the screw (M2x3) that secures the USB Type-C bracket to the system board.
20.
Lift the USB Type-C bracket off the system board.
NOTE:
The USB Type-C bracket on the bottom of the system board must be transferred to the replacement system board.
21.
Turn the system-board assembly over.
22.
After performing all the above steps, you are left with the system board.
NOTE:
Before returning the faulty system board. Adhere the processor (CPU) sticker over the processor (CPU) chip and
GPU sticker over the GPU and ensure that it covers the entire surface of it.
89