Dell Dimension 8250 Dell Dimension 8250 Owner's Manual - Page 97
My Computer, Properties, General
View all Dell Dimension 8250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
securing clips (2) notches (2) memory module connector cutouts (2) memory connectors on system board step 5 step 6 step 7 6 Align the notches on the bottom of the module with the crossbar in the connector. NOTICE: To avoid damage to the memory module, press the module straight down into the socket with equal force applied at each end of the module. 7 Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place. If you insert the module correctly, the securing clips snap into the cutouts at each end of the module. 8 Close the computer cover (see page 107). NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 9 Connect your computer and devices to electrical outlets, and turn them on. 10 Right-click the My Computer icon and then click Properties. 11 Click the General tab. Adding Pa rts 97