Dell Force10 E600i E600i System Installation Guide - Page 32
Install RPMs, Line Cards, and SFMs, Installing RPMs and Line Cards into the E600i
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
www.dell.com | support.dell.com Install RPMs, Line Cards, and SFMs The installation process is the same for RPMS, line cards, and SFMs: Step Task 1 Hold the card by the edges. Avoid touching the printed circuit board and connector pins. Extend the top and bottom card levers before you insert the card into the slot. 2 Align the card with the slot guide for the appropriate (RPM, line card, or SFM) slot and gently slide it in until the connectors engage with the chassis backplane. 3 Rotate the lever(s) to seat the card in the chassis. 4 Secure card in place by tightening the captive screw(s) on each card. 5 Install blank panels in all unused RPM and line card slots. Figure 7-1. Installing RPMs and Line Cards into the E600i 32 | Installing RPMs, Line Cards, and SFMs