Dell Force10 E600i E600i System Installation Guide - Page 47
BOOT_USER # show bootvar, PRIMARY OPERATING SYSTEM BOOT PARAMETERS, boot device, flash, file name
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
4 show bootvar This command displays the current operating system boot configuration parameters. BOOT_USER # show bootvar PRIMARY OPERATING SYSTEM BOOT PARAMETERS: boot device : flash file name : /E600i-x.bin SECONDARY OPERATING SYSTEM BOOT PARAMETERS: 5 boot change {primary | secondary | default} If your configuration displays no preconfigured operating system boot parameters, use the boot change command to edit appropriate fields. • The primary operating system boot parameters are used in the first attempt to boot the system. • The secondary operating system boot parameters are used if the primary operating system boot selection is not available. • The default operating system boot parameters are used if the secondary operating system boot parameter selection is not available. The default parameters always reside on the internal flash device (flash:). NOTE: These parameters, as well as other boot parameters, can be modified in the CLI mode. When you enter the boot change command, you are prompted for a response. • Enter a new parameter or press the ENTER key (carriage return) to accept the default parameter. • Enter . (period) to clear a field. • Enter - (dash) to edit a field above the current cursor position. NOTE: When you enter a new parameter that extends beyond 80 characters, you cannot use the BACKSPACE key to correct any mistakes. If you make a mistake, you must re-enter the parameter. BOOT_USER # boot change primary '.' = clear field; '-' = go to previous field boot device : flash file name : /E600i-6.x.bin BOOT_USER # boot change default '.' = clear field; '-' = go to previous field boot device : flash file name : /E600i-6.x.bin BOOT_USER # System Boot | 47