Dell Force10 E600i E600i System Installation Guide - Page 36
Accessing the Console with a DB-9 Adapter, Pinouts for an RJ-45 Connector End of Adaptor
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
www.dell.com | support.dell.com Figure 8-1. Pinouts for an RJ-45 Connector End of Adaptor 87654321 Table 8-1 displays the RJ-45 console port pin assignments. Table 8-2 displays the RJ-45 auxiliary port pin assignments. Table 8-1. Console Port (RJ-45) Pin Assignments Pin Signal 1 NC (unused) 2 DTR 3 TxD 4 GND 5 GND 6 RxD 7 DSR 8 NC (unused) Input/Output Output Output Input Input - Table 8-2. Auxiliary Port (RJ-45) Pin Assignments Pin Signal 1 RTS 2 DTR 3 TxD 4 GND 5 GND 6 RxD 7 DSR 8 CTS Input/Output Output Output Output Input Input Input Accessing the Console with a DB-9 Adapter You can connect to the console using a RJ-45 to RJ-45 rollover cable and a RJ-45 to DB-9 female DTE adapter (labeled "TERMINAL") to a terminal server (for example, PC). Table 8-3 lists the pin assignments. 36 | RPM Ports and Cables