Dell Force10 E600i E600i System Installation Guide - Page 39
Air Filter
View all Dell Force10 E600i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
9 Air Filter A factory-installed air filter is shipped with the E-Series system. The hot-swappable air filter prevents large particles, debris, and dust from entering and circulating through the system, and ensures proper air flow. Inspected monthly and replace them at least every twelve months. To install the filter, orient it so that the label "This Side Up" is facing upward. Guide the filter into the slot until it makes contact with the back of the chassis. An improperly installed air filter restricts air flow and generates thermal problems throughout the chassis. Ensure that the air filter is oriented correctly and seated securely in the slot. To remove the filter, pull it straight out of the chassis. Do not operate the chassis without a filter for longer than 3 minutes to avoid card over-temperature conditions. Figure 9-1. Installing the Air Filter in an E600i Air Filter | 39