Dell Force10 S25-01-GE-24V FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1221

threshold e Specify the minimum and maximum threshold values for the configured WRED profiles. Syntax threshold min number max number To remove the threshold values, use the no threshold min number max number command. Parameters min number max number Enter the keyword min followed by the minimum threshold number for the WRED profile. Range: 1024 to 77824 KB Enter the keyword max followed by the maximum threshold number for the WRED profile. Range: 1024 to 77824 KB Defaults No default behavior or values Command Modes CONFIGURATION (config-wred) Command History pre-Version 6.1.1.1 Introduced on E-Series Usage Information Use this command to configure minimum and maximum threshold values for user defined profiles. Additionally, use this command to modify the minimum and maximum threshold values for the pre-defined WRED profiles. If you delete threshold values of the pre-defined WRED profiles, the profiles will revert to their original default values. Table 47-8. Pre-defined WRED Profile Threshold Values Pre-defined WRED Profile Name Minimum Threshold wred_drop 0 wred_ge_y 1024 wred_ge_g 2048 wred_teng_y 4096 wred_teng_g 8192 Maximum Threshold 0 2048 4096 8192 16384 Related Commands wred-profile Create a WRED profile. trust c e s Specify dynamic classification (DSCP) or dot1p to trust. Syntax trust {diffserv [fallback]| dot1p [fallback]| ipv6-diffserv} Parameters diffserv dot1p Enter the keyword diffserv to specify trust of DSCP markings. Enter the keyword dot1p to specify trust dot1p configuration. Quality of Service (QoS) | 1221