Dell Force10 S25-01-GE-24V FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 143
reset power-cycle, redundancy force-failover, show chassis brief, Table 5-7., Descriptions of show
View all Dell Force10 S25-01-GE-24V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 143 highlights
Table 5-7. Descriptions of show rpm output (continued) Field Last Restart FTOS Version Jumbo Capable CP Boot Flash RP1 Boot Flash RP2 Boot Flash CP Mem Size RP1 Mem Size PR2 Mem Size Temperature Power Status Voltage Serial Num Part Num Vendor ID Date Code Country Code Description States the reason for the last RPM reboot. C-Series possible values: • "normal power-cycle" (reset power-cycle command) • "reset by master" (peer RPM reset by master RPM) • "over temperature shutdown" • "power supply failed" E-Series possible values: • "normal power-cycle" (insufficient power, normal power cycle) • "reset by user" (automatic failover, software reload of both RPMs, or master RPM resetting peer) • "force-failover" (redundancy force-failover command) Displays the operating software version. Displays a Yes or No indicating if the RPM is capable of sending and receiving Jumbo frames. This field does not indicate if the chassis is in Jumbo mode; for that determination, use the show chassis brief command. Displays the two possible Boot Flash versions for the Control Processor. The [Booted] keyword next to the version states which version was used at system boot. Displays the two possible Boot Flash versions for the Routing Processor 1. The [Booted] keyword next to the version states which version was used at system boot. Displays the two possible Boot Flash versions for the Routing Processor 2. The [Booted] keyword next to the version states which version was used at system boot. Displays the memory of the Control Processor. Displays the memory of the Routing Processor 1. Displays the memory of the Routing Processor 2. Displays the temperature of the RPM. Minor alarm status if temperature is over 65° C. Lists the status of the power modules in the chassis. Displays the power rails for the line card. Displays the line card serial number. Displays the line card part number. Displays an internal code, which specifies the manufacturing vendor. Displays the line card's manufacturing date. Displays the country of origin. 01 = USA Related Commands show chassis show linecard show sfm View information on all elements of the system. View information on a line card. View information on the SFM. Control and Monitoring | 143