Dell Force10 S25-01-GE-24V FTOS 8.4.2.7 Command Line Reference Guide for E-Ser - Page 1559

• show hardware fpc forward • show hardware fpc lookup detail • show hardware rpm cp • show hardware rpm mac counters • show hardware rpm rp1/rp2 • show interfaces link-status • show logging driverlog • show running-config hardware-monitor See also in Chapter 23, Interfaces": • show interfaces phy • show interfaces transceiver clear hardware btm e Clear the Buffer Traffic Manager (BTM) error counters and status registers. Syntax clear hardware {rpm | linecard} number port-set pipe-number btm {egress | ingress | all} {errors | status} Parameters rpm linecard number port-set pipe-number egress errors | status ingress errors | status all errors | status Enter the keyword rpm to clear BTM error counters or status registers on the RPM. Enter the keyword linecard followed by the line card slot number to clear BTM error counters or status registers on the specified line card. Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on an E300 Enter the keyword port-set followed by the number of the line card or RPM's Port-Pipe. Range: 0 to 1 (OPTIONAL) Enter the keywords egress errors or egress status to clear egress BTM error counters or ingress BTM status registers. (OPTIONAL) Enter the keywords ingress errors or ingress status to clear ingress BTM error counters or ingress BTM status registers. (OPTIONAL) Enter the keywords all errors or all status to clear both egress and ingress BTM error counters and status registers. Defaults No default behavior or values Command Modes EXEC EXEC Privilege Command History Version 6.5.4.0 Introduced E-Series Debugging and Diagnostics | 1559