Dell OptiPlex 9020M Dell OptiPlex 9020M Owners Manual - Page 35
Removing the System Board, SATA HDD connector - memory
View all Dell OptiPlex 9020M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
3. speaker connector 4. memory connectors (SODIMM sockets) 5. WLAN connector 6. heat sink 7. slot M2 connector 8. SATA HDD connector 9. coin-cell battery 10. HDMI or display port connector 11. PS2 and serial port connector Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a. cover b. processor fan module c. hard drive d. heatsink e. memory f. processor g. HDMI board h. PS2 and serial connector board i. M.2 SSD or DDPE card j. WLAN card k. coin-cell battery 3. Perform the following steps as shown in the illustration. a. Remove the screw that secures the hard-drive holder to the system board [1]. b. Lift the hard-drive holder away from the system board [2]. c. Remove the screws that secure the system board to the computer [3]. 35