Dell OptiPlex 9020M Dell OptiPlex 9020M Owners Manual - Page 40
Option, Description, Default Setting: Not set - bios
View all Dell OptiPlex 9020M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Option USB Configuration Audio Table 4. Security Option Admin Password System Password Description This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type of USB mass storage devices (HDD, memory key, floppy). If USB port is enabled, device attached to this port is enabled and available for operation system. If USB port is disabled, the operation system cannot see any device attached to this port. USB configuration: • Enable Boot Support • Rear USB 3.0 Ports a. Port1 (Top) b. Port2 (Upper middle) c. Port3 (Lower middle) d. ort4 (Bottom) • Front USB 3.0 Ports a. Port1 (Top) b. Port2 (Bottom) NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings. Allows you to enable or disable the integrated audio controller. • Enable Audio • Enable Microphone • Enable Internal Speaker This option is enabled by default. Description Allows you to set, change, or delete the administrator (admin) password. NOTE: You must set the admin password before you set the system or hard drive password. Deleting the admin password automatically deletes the system password and the hard drive password. NOTE: Successful password changes take effect immediately. Default Setting: Not set Allows you to set, change or delete the system password. NOTE: Successful password changes take effect immediately. Default Setting: Not set 40