Dell OptiPlex 9020M Dell OptiPlex 9020M Owners Manual - Page 36

Installing the System Board, M.2 SSD or DDPE card

Page 36 highlights

4. Perform the following steps as shown in the illustration. a. Slide the system board to release it from the computer [1,2]. b. Lift the system board away from the computer [3]. Installing the System Board 1. Place the system board inside the chassis. 2. Tighten the screws to secure the system board to the base panel. 3. Place the hard-drive holder on the system board. 4. Tighten the screws to secure the hard-drive holder to the system board. 5. Install: a. coin-cell battery b. WLAN card c. M.2 SSD or DDPE card d. HDMI board e. PS2 and serial connector board f. processor g. memory h. heatsink i. hard drive j. processor fan module k. cover 6. Follow the procedures in After Working Inside Your Computer. 36

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55

4.
Perform the following steps as shown in the illustration.
a.
Slide the system board to release it from the computer [1,2].
b.
Lift the system board away from the computer [3].
Installing the System Board
1.
Place the system board inside the chassis.
2.
Tighten the screws to secure the system board to the base panel.
3.
Place the hard-drive holder on the system board.
4.
Tighten the screws to secure the hard-drive holder to the system board.
5.
Install:
a.
coin-cell battery
b.
WLAN card
c.
M.2 SSD or DDPE card
d.
HDMI board
e.
PS2 and serial connector board
f.
processor
g.
memory
h.
heatsink
i.
hard drive
j.
processor fan module
k.
cover
6.
Follow the procedures in
After Working Inside Your Computer
.
36