Dell PowerConnect 6248 User's Guide - Page 101
Abort Boot Code Update, Update Boot Code, Boot Code FLASH flag
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Operational Code Offset 0x74 (116) Operational Code FLASH flag 1 Operational Code CRC 0x9B4D Boot Code Version 1 Boot Code Size 0x100000 (1048576) Boot Code Offset 0x7ec0bc (8306876) Boot Code FLASH flag 0 Boot Code CRC 0x1CB8 VPD - rel 3 ver 1 maint_lvl 0 build_num 4 Timestamp - Thu Jun 8 12:51:44 2009 File - pc62xxr0v3.2.1.0.stk 2. The boot process resumes. Abort Boot Code Update Use option 6 to abort a boot code update initiated by the user. A user can initiate a boot code update by selecting option 7 on the boot menu or by entering a CLI command. This sets a flag and causes the system to reboot. When the boot code starts, the system reads the flag and determines that a boot code update has been requested, and pauses for user response. The boot code update proceeds if there is no user response within 10 seconds. During that interval, the user can enter the boot menu and select option 6 to cancel the boot code update and continue rebooting. Update Boot Code Use option 7 to update the boot code in the flash memory. This option is only valid after loading new boot code using Boot Menu option 4. User action is confirmed with a Y/N question before executing the command. To download software from the Boot menu: 1. On the Boot menu, select 7 and press . The following prompt displays: Do you wish to update Boot Code? (y/n) y Validating image2....OK Extracting boot code from image...CRC valid Erasing Boot Flash.....Done. Wrote 0x10000 bytes. Configuring Dell PowerConnect 101