Dell PowerConnect 6248 User's Guide - Page 395
VLAN ID, New Bridge Multicast, IP or MAC, Bridge Multicast Group, Static, Apply Changes, Current
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 395 highlights
3. Select the VLAN ID from the drop-down menu. 4. Define the New Bridge Multicast IP or MAC address. 5. In the Bridge Multicast Group tables, assign a setting by clicking in the Static row for a specific port/LAG. Each click toggles between S, F, and blank. (not a member). 6. Click Apply Changes. The bridge multicast address is assigned to the multicast group, ports/LAGs are assigned to the group (with the Current rows being updated with the Static settings), and the device is updated. Assigning an Interface to an existing Multicast Group 1. Open the Bridge Multicast Group page. 2. Select the VLAN ID from the drop-down menu. The associated Bridge Multicast Address displays. 3. In the Bridge Multicast Group tables, assign a setting by clicking in the Static row for a specific port/LAG. Each click toggles between S, F, and blank (not a member). 4. Click Apply Changes. The interface is assigned to the multicast group, the Current row is updated with the Static setting, and the device is updated. Removing a Bridge Multicast Group 1. Open the Bridge Multicast Group page. 2. Select the VLAN ID associated with the bridge multicast group to be removed from the drop-down menu. The Bridge Multicast Address and the assigned ports/LAGs display. 3. Check the Remove check box. 4. Click Apply Changes. The selected bridge multicast group is removed, and the device is updated. Managing Bridge Multicast Groups Using CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Address Table Commands The following table summarizes the equivalent CLI commands for this feature. Configuring Switching Information 395