Dell PowerConnect 6248 User's Guide - Page 705

The following table summarizes the equivalent CLI commands for this feature. Table 11-8. Mapping Table Configuration Commands CLI Command classofservice dotlp-mapping classofservice ip-dscp-mapping classofservice trust show classofservice dotlp-mapping show classofservice ip-dscp-mapping show classofservice trust show interfaces cos-queue Description Maps an 802.1p priority to an internal traffic class for a switch. Maps an IP DSCP value to an internal traffic class. Sets the class of service trust mode of an interface. Displays the current Dot1p (802.1p) priority mapping to internal traffic classes for a specific interface. Displays the current IP DSCP mapping to internal traffic classes for a specific interface. Displays the current trust mode setting for a specific interface. Displays the class-of-service queue configuration for the specified interface. Interface Configuration Use the Interface Configuration page to specify ports individually for CoS configuration and to apply an interface shaping rate to the selected ports. To display the Interface Configuration page, click Quality of Service →Class of Service →Interface Configuration in the tree view. Figure 11-18. Interface Configuration The Interface Configuration page contains the following fields: • Interface - Selects the interface to be affected by the Interface Shaping Rate. Select Unit/Port, or LAG to be affected from the drop-down menu. Select Global to specify all interfaces. Configuring Quality of Service 705