Dell PowerConnect 6248 User's Guide - Page 400
Apply Changes, General, Show All, Snooping Table, Copy Parameters From, Copy
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 400 highlights
5. Click Apply Changes. The IGMP Snooping settings are modified, and the device is updated. Copying IGMP Snooping Settings to Multiple Ports, LAGs, or VLANs 1. Open the General IGMP snooping page. 2. Click Show All. The IGMP Snooping Table displays. 3. Click Copy Parameters From. 4. Select a Unit/Port, LAG, or VLAN to use as the source of the desired parameters. 5. Click Copy To for the Unit/Ports, LAGs, or VLANs that these parameters will be copied to. 6. Click Apply Changes. The IGMP Snooping settings are modified, and the device is updated. Configuring General IGMP Snooping Settings with CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • IGMP Snooping Commands The following table summarizes the equivalent CLI commands for this feature. Table 7-42. IGMP Snooping Commands CLI Command ip igmp snooping (Interface) ip igmp snooping host-time-out ip igmp snooping leave-time-out ip igmp snooping mrouter-time-out show ip igmp snooping groups show ip igmp snooping interface ip igmp snooping (VLAN) ip igmp snooping fast-leave ip igmp snooping groupmembershipinterval Description Enables Internet Group Management Protocol (IGMP) snooping on a specific VLAN. Configures the host-time-out. Configures the leave-time-out. Configures the mrouter-time-out. Displays Multicast groups learned by IGMP snooping. Displays IGMP snooping configuration. In VLAN Config mode, enables IGMP snooping on a particular VLAN or on all interfaces participating in a VLAN. Enables or disables IGMP Snooping fast-leave mode on a selected VLAN. Sets the IGMP Group Membership Interval time on a VLAN. 400 Configuring Switching Information