Dell PowerConnect 6248 User's Guide - Page 428
Extended Power via MDI - PD
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
• Config Notification Mode - Specifies the LLDP-MED topology notification mode for the selected interface. • Transmit TLVs - Specifies which optional type length values (TLVs) in the LLDP-MED will be transmitted in the LLDP PDUs frames for the selected interface. - MED Capabilities - To transmit the capabilities TLV in LLDP frames. - Network Policy - To transmit the network policy TLV in LLDP frames. - Location Identification - To transmit the location TLV in LLDP frames. - Extended Power via MDI - PSE - To transmit the extended PSE TLV in LLDP frames. - Extended Power via MDI - PD - To transmit the extended PD TLV in LLDP frames. - Inventory - To transmit the inventory TLV in LLDP frames. Modifying the LLDP-MED Interface Configuration 1. Open the LLDP Configuration page. 2. Specify the unit and select a port to configure, or select All to configure all ports with the same settings. 3. Configure the LLDP-MED settings for the interface or interfaces 4. Click Apply Changes. LLDP-MED parameters are saved to the switch. NOTE: If you configured All ports, the settings you applied will not display after the page updates. Select a specific interface or click Show All to view interface LLDP-MED settings. Displaying the Interface Summary 1. Open the LLDP-MED Interface Configuration page. 2. Click Show All. The LLDP-MED Interface Summary page displays and provides summary LLDP-MED information for all interfaces: Figure 7-101. LLDP-MED Interface Summary Configuring LLDP-MED Interface Settings with CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • LLDP Commands The following table summarizes the equivalent CLI commands for this feature. 428 Configuring Switching Information