Dell PowerConnect 6248 User's Guide - Page 716
Table 12-1., Multicast Global Commands, CLI Command, Description
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 716 highlights
Table 12-1. Multicast Global Commands (continued) CLI Command ip pimsm spt-threshold ip pimsm ssm show ip mcast show ip mcast boundary show ip mcast interface show ip mcast mroute show ip mcast mroute group show ip mcast mroute source show ip mcast mroute static show ip pimsm bsr show ip pimsm interface show ip pimsm rphash show ip pimsm rp mapping Description Configures the Data Threshold rate for the last hop router to switch to the shortest path. Defines the Source Specific Multicast (SSM) range of IP multicast addresses. Displays the system-wide multicast information. Displays all the configured administrative scoped multicast boundaries. Displays the multicast information for the specified interface. Displays a summary or all the details of the multicast table. Displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast mroute table containing the groupipaddr value. Displays the multicast configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF neighboring routers, and expiration times of all the entries in the multicast mroute table containing the sourceipaddr or sourceipaddr | groupipaddr pair value(s). Displays all the static routes configured in the static mcast table if it is specified or display the static route associated with the particular sourceipaddr. Displays the bootstrap router (BSR) information. Displays interface config parameters. Displays which rendezvous point (RP) is being selected for a specified group. Displays all group-to-RP mappings of which the router is aware (either configured or learned from the bootstrap router (BSR)). 716 Configuring IP Multicast