Dell PowerConnect 6248 User's Guide - Page 771
Candidate RP Configuration, Neighbor Count
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 771 highlights
• BSR Border - Specifies the BSR border mode on the PIM interface. This field is not supported for PIM-DM. • Designated Router - The designated router on the selected PIM interface. For point-to-point interfaces, this is 0.0.0.0. Interface Neighbors fields are: • Neighbor Count - The number of PIM neighbors on the selected interface. • Neighbor IP - The IP address of the PIM neighbor for which this entry contains information. • Up Time (hh:mm:ss) - The time since this PIM neighbor (last) became a neighbor of the local router. • Expiry Time (hh:mm:ss) - The minimum time remaining before this PIM neighbor is aged out. Displaying PIM Interface Summary Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • PIM-DM or PIM-SM Commands The following table summarizes the equivalent CLI commands for this feature. Table 12-35. PIM Interface Summary Commands CLI Command show ip pimdm interface show ip pimsm interface Description Displays interface information for PIM-DM on the specified interface. Displays interface information for PIM-SM on the specified interface. Candidate RP Configuration The Candidate RP is configured on the Add Candidate RP page. Use the Candidate RP Configuration page to display and delete the configured rendezvous points (RPs) for each port using PIM. To access the page, click IPv4 Multicast →PIM →Candidate RP Configuration or IPv6 Multicast → PIM →Candidate RP Configuration. Configuring IP Multicast 771