Dell PowerConnect 6248 User's Guide - Page 565
RIP Interface Summary, Modify, Apply Changes, Routing
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 565 highlights
2. Specify the interface for which the authentication method is to be configured. 3. Click Modify. The Authentication Method page displays. 4. Specify the Authentication Type (None, Simple, or Encrypt) from the drop-down menu. 5. If you specify Simple or Encrypt as the Authentication Type, additional fields appear. Enter the Authentication Key (Simple or Encrypt) and Authentication Key ID (Encrypt). 6. Click Apply Changes. 7. The authentication method is updated, and the device is updated. Configuring the RIP Interface with the CLI Commands For information about the CLI commands that perform this function, see the following chapter in the CLI Reference Guide: • Routing Information Protocol (RIP) Commands The following table summarizes the equivalent CLI commands for this feature. Table 9-26. RIP Interface Configuration Commands CLI Command ip rip ip rip authentication ip rip receive version ip rip send version show ip rip interface Description Enables RIP on a router interface. Sets the RIP Version 2 Authentication Type and Key for the specified interface. Configures the interface to allow RIP control packets of the specified version(s) to be received. Configures the interface to allow RIP control packets of the specified version to be sent. Displays information related to a particular RIP interface. RIP Interface Summary Use the RIP Interface Summary page to display RIP configuration status on an interface. To display the page, click Routing →RIP →Interface Summary in the tree view. Configuring Routing 565