Dell PowerConnect 6248 User's Guide - Page 717
Multicast Interface Configuration, IPv4 Multicast, Multicast, Interface Configuration, Interface
View all Dell PowerConnect 6248 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 717 highlights
Multicast Interface Configuration Use the Multicast Interface Configuration page to configure the TTL threshold of a multicast interface. You must configure at least one router interface before fields display on this page. To display the page, click IPv4 Multicast →Multicast →Interface Configuration in the tree view. Figure 12-2. Multicast Interface Configuration The Multicast Interface Configuration page contains the following fields: • Interface - Select the routing interface you want to configure from the drop-down menu. • TTL Threshold - Enter the TTL threshold below which a multicast data packet is not forwarded from the selected interface. Enter a number between 0 and 255. If you enter 0, all multicast packets for the selected interface are forwarded. You must configure at least one router interface to see this field. Configuring a Multicast Interface 1. Open the Multicast Interface Configuration page. 2. Select the interface to configure from the Interface drop-down menu. 3. Enter the desired TTL Threshold. 4. Click Apply Changes. The multicast interface configuration is saved, and the device is updated. Configuring a Multicast Interface Using CLI Commands For information about the CLI command that performs this function, see the following chapter in the CLI Reference Guide: • Multicast Commands The following table summarizes the equivalent CLI commands for this feature. Configuring IP Multicast 717