Dell PowerEdge M1000e Dell PowerEdge M1000e Configuration Guide - Page 31
Logging in to the CMC Using the Web-Based Interface, Address, Login - specifications
View all Dell PowerEdge M1000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3 Configure the CMC network settings: - To set a static IP address, type setniccfg -s and press . Use the appropriate settings for your network. - To configure the CMC to obtain an IP address using DHCP, type setniccfg -d and press . The new network settings are activated in a few seconds after configuring the network. Logging in to the CMC Using the Web-Based Interface 1 Open a supported Web browser window. For more information, see "Supported Web Browsers" in the CMC User's Guide. 2 Log in to the CMC. - If the CMC is accessed using a specific IP address, type the following URL in the Address field, and then press : https:// The default IP address for the CMC is 192.168.0.120. If the default HTTPS port number (port 443) has been changed, type: https://: where is the IP address for the CMC and port number is the HTTPS port number. - If you access the CMC using a registered DNS name, type the CMC's name: https:// By default, the CMC name on the DNS server is cmc-. The CMC Login page is displayed. Initial System Configuration 31