Dell PowerEdge M1000e Dell PowerEdge M1000e Configuration Guide - Page 45
FlexAddress Plus is delivered on the FlexAddress Plus Secure Digital SD, support.dell.com - technical specifications
View all Dell PowerEdge M1000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Component Minimum Required Version CMC Version 1.10 or later NOTE: Components not appearing in the above table require no updates to enable the FlexAddress feature. Activating FlexAddress Plus FlexAddress Plus is delivered on the FlexAddress Plus Secure Digital (SD) card along with the FlexAddress feature. NOTE: The SD card labeled FlexAddress only contains FlexAddress and the card labeled FlexAddress Plus contains FlexAddress and FlexAddress Plus. The card must be inserted into the CMC to activate the feature. The updates, which are listed in the table below include, BIOS, iDRAC, and CMC firmware. As long as FlexAddress is activated, you must apply these updates before you can use FlexAddress Plus. If these updates are not applied, only FlexAddress works and not FlexAddress Plus. Component Server Module BIOS iDRAC CMC Minimum required version PowerEdge M710HD Version 3.0 or later Version 3.0 or later For more information on the FlexAddress feature, see the following resources: • The CMC Secure Digital (SD) Card Technical Specification document at support.dell.com. • The Help link in the CMC Web interface. • The "Using FlexAddress" chapter in the CMC User's Guide. Initial System Configuration 45